About WISE

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive HMI interface that allows users to implement control logic on controllers just a few clicks away; no programming is required. With this powerful and easy-to-use software, it will minimize the learning curve, shorten time to market and dramatically reduce the labor and cost spent on system development.

 

System Architecture

Through Web browser, users can access Web Server on WISE controllers to perform tasks such as logic rule edition and download. A Rule Engine will be set up to manage and deploy logic rules for controllers. The Rule Engine will check whether the rules are valid or not and determine the execution of actions under specific conditions, for examples: setting up I/O channel values, perform scheduled tasks, sending Email/SMS message or sending CGI command under a specific condition. With WISE Advanced P2P function, all WISE controllers in network can freely share their status such as AIO value, DIO value, DIO Counter value or Internal Register value to each others. This function greatly enhances the flexibility and boosts accuracy to the logic rule design and makes it easy to enable the interactions between the controllers. In addition, through Modbus TCP Protocol, SCADA package enables to control and monitor I/O channel or system status on WISE controller in real time.
 

WISE Features
   
●
IF-THEN-ELSE logic rules execution ability
 

WISE controller is equipped with an IF-THEN-ELSE logic Rule Engine, it offers up to 36 IF-THEN-ELSE rules for users to set up the logic content. After completing rule edition and uploading rules to the WISE controller, the Rule Engine will loop execute the rules in accordance with the execute order under specific conditions.
 
●
No programming is required to implement logic content on controllers
 

WISE provides user-friendly Web UI pages for editing control logic on the controllers. It enables to implement logic edition by a few clicks on the mouse to set up and deploy logic rules without writing a single line of code.

 
●
No extra software tool is required; all operations can be done through the Web browsers
 

WISE HMI interface runs on regular Web browsers. To edit control logic, it only requires a browser to connect to the Web server on WISE controller. No extra software tool installation is needed on the target PC.
 
●
Support various hardware controllers that are with different I/O types
 

The wide range of I/O function modules ICP DAS provided allows users to find best solutions that meet their requirements.
 
●
Support Modbus RTU Slave Module (WISE-580x only)
 

WISE allows to connect with devices that support Modbus RTU Slave protocol for I/O monitoring. The ability to connect with Modbus RTU Slave devices enable flexibility and scalability for system implementation and allows to meet various requirements from the clients.
 
●
Provide Timer and Schedule operation
 

WISE features two kind of timing functions: Timer and Schedule. It allows user to schedule specific date or time for control logic execution, or perform specific tasks such as time delay.
 
●
Provide Email message and CGI command sending functions
 

WISE supports Email message and CGI command sending functions. Email and CGI command functions are important functions for real-time message communication. The sending action can be added to the logic edition as part of logic control to provide real-time message transmission or sending CGI command for device control in response to specific events.
 
●
Provides SMS alarm notification function (WISE-4000 and WISE-5801 only)
 

WISE is equipped with SMS alarm message notification function. It allows to include SMS alarm sending action into logic rules to send a pre-set SMS message to related personnel when an event occurs.
 
●
Provides SMS command receiving function (WISE-5801 only)
 

WISE is equipped with SMS command receiving function. It allows to receive the SMS commands sending by specific phones numbers to perform tasks such as real-time channel monitoring, channel data modification and logic rules execution (triggered by SMS), etc.
 
●
Fully P2P function between WISE controllers (WISE-71xx, WISE-790x and WISE-4000 only)
 

WISE offers P2P function that enables WISE controllers to directly communicate with other remote WISE controllers on networks. All WISE controllers can freely share their status information such as I/O channel value, DI/DO Counter or Internal Register to each others. The P2P operations can be incorporated into WISE logic rules as Condition statements or Action statements for Condition evaluation criteria or Action executions.
 
●
Recipe function for Group Action operation
 

WISE provides Recipe function that allows to execute a sequence of actions previously saved in the Recipe to response to IF-THEN-ELSE logic rules Conditions. Different Recipe sets can be edited to meet various requirements for different applications.
 
●
Data Logger function (WISE-580x only)
 

With the microSD card, WISE provides Data Logger function to real-time record the I/O data of the controller and sends the data files by FTP or Email to the control center for further administration management or data analysis.
 
●
Real-time monitoring system status of controllers
 

WISE supports Modbus TCP/RTU Protocol for users to perform real-time monitoring and control of the controllers. In addition, WISE provides an easy to view HMI web interface for real-time monitoring. It allows users to get important real time system information even without SCADA software.

 
●
Password protection for upload access control for logic rules
 

WISE HMI web page offers password protection; it allows users to modify the password for upload access control of the logic rules.

 
back