WISE-7151

				16-channel Isolation Digital Input PoE Module

Introduction

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.

WISE-7151 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7151 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.

This module WISE-7151 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 16-channel isolated wet contact digital inputs. Each digital input channel supports counter input.

Features

• Built-in Web Server for IF-THEN-ELSE rule setting
• Built-in IF-THEN-ELSE rule enigne for logic operation
• No more programming. Just click and get done!
• Support IO, Counter, Timer, Email operations
• Modbus/TCP Protocol for SCADA Software Seamless Integration
• IEEE 802.3af-compliant Power over Ethernet (PoE)
• 10/100 Base-TX Ethernet
• 2-way Isolation/ESD Protection
• DI Type: 16 Wet Contact (Sink, Source)

Applications

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.

Hardware Specifications

Digital Input
Input Channels		16
Input Type		Wet Contact (Sink, Source)
On Voltage Level		+10 VDC ~ +50 VDC
Off Voltage Level		+4 VDC Max.
Input Impedance		10 kΩ
Counters	Max. Count	65535 (16 bits)
	Max. Input Frequency	50 Hz
	Min. Pulse Width	10 ms
Overvoltage Protection		+70 VDC
System
CPU		16-bit CPU
SRAM		512 KB
Flash Memory		512 KB
EEPROM		16 KB
Watchdog		Yes
Communication
PoE Ethernet Port		10 / 100 Base-TX and Automatic MDI/MDI-X
2 Way Isolation
I/O		2500 VDC
EMS Protection
ESD (IEC 61000-4-2)		±4 kV Contact for Each Terminal and ±8 kV Air for Random Point
EFT (IEC 61000-4-4)		±2 kV for Power Line
LED Indicators
PoE		PoE On
L1		System Running
L2		Ethernet Link/Act
L3		Ethernet 10/100M Speed
Power Requirements
Reserve Polarity Protection		Yes
Powered from terminal block		Yes, 12 ~ 48 VDC
Powered from PoE		Yes, IEEE 802.3af, Class1
Consumption		3.9 W
Mechanical
Dimensions (W x H x D)		72 mm x 123 mm x 35 mm
Installation		DIN-Rail or Wall mounting
Environment
Operating Temperature		-25 °C ~ +75 °C
Storage Temperature		-30 °C ~ +80 °C
Humidity		10 ~ 90% RH, non-condensing

Software Specifications

Functions
Rule Configuration Website	Access Web server on WISE controllers to edit and upload logic rules through web browser.
36 IF-THEN-ELSE Logic Rules	3 IF conditions with AND or OR operators 3 THEN actions and 3 ELSE actions
48 Internal Registers	Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers	Delay / Timing functions.
12 Emails	Send Email messages to pre-set Email receivers.
12 CGI Commands	Send pre-set CGI commands.
12 Recipes	Set up THEN/ELSE action groups.
8 P2P remote modules	Set up the connection information for the remote WISE modules.
Modbus/TCP Protocol	Real time control and monitoring I/O channels and system status of controllers via SCADA software.
IF Conditions
DI Channel	ON、OFF、ON to OFF、OFF to ON、Change
Internal Register	= 、> 、< 、 ≥ 、 ≤ (value)
DI Counter	= 、> 、< 、 ≥ 、 ≤ (value)、Change
Timer	Timeout、Not Timeout
P2P	DI、AI、DI counter、DO counter、IR
Rule Status	Enable、Disable
THEN / ELSE Actions
Internal Register	Change the value
DI Counter	Reset
Timer	Start、Stop
Email	Send
CGI Commands
Recipe	Execute
P2P	DO(On/Off)、AO、IR
Rule Status	Enable、Disable

Ordering Information

• WISE-7151 CR

16-channel Isolation Digital Input PoE Module (RoHS)

Accessories

• GPSU06U-6 : 24 V/0.25 A, 6 W Power Supply
• MDR-20-24 : 24 V/1 A, 24 W Power Supply with DIN-Rail Mounting
• NS-205 CR : Unmanaged 5-Port Industrial Ethernet Switch (RoHS)
• NS-205PSE-24V CR : Unmanaged 5-Port Industrial PoE Ethernet Switch (RoHS)