WISE-5800-MTCP
 |
User-defined I/O & Data Logger Module for Modbus TCP Devices | ||||
|
|||||
Introduction
WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the labor and cost spent on system development.
WISE-5800-MTCP supports an I/O expansion bus to implement various I/O functions such as D/I, D/O, A/D and D/A according to the XW-Board. In addition, WISE-5800-MTCP also supports Modbus TCP slave devices. Based on the connection ability with Modbus TCP slave devices, WISE-5800-MTCP can provide user more flexibility in application field.
WISE-5800-MTCP supports Modbus TCP/RTU protocol to make seamless integration with SCADA software available. It includes all advantages which WISE series controllers can provide. In addition, WISE-5800-MTCP provides data logger function with microSD card, it can record I/O channel value by event trigger or regular time period. The data files can be sent back by Email or FTP. All setting can be completed through browser.
Features
- Built-in Web Server for IF-THEN-ELSE rule setting
- Built-in IF-THEN-ELSE rule enigne for logic operation
- No more programming. Just click and get done!
- Support IO, Counter, Timer, Schedule, Email, Recipe operations
- Data logger and data files send back function supported
- Modbus TCP/RTU Protocol for SCADA Software Seamless Integration
- Support XW-Board
- Support Modbus TCP Slave Devices(Up to 7)
- SNTP Time Synchronization Supported
Applications
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.
Hardware Specifications
| System | |
| CPU | 16-bit CPU |
| SRAM | 768 KB |
| Flash Memory | 512 KB |
| EEPROM | 16 KB |
| NVRAM | 31 Bytes |
| microSD Expansion | Support 1G/2G/4G/8G/16G/32G microSD card |
| RTC (Real Time Clock) | Provide second, minute, hour, date of week, month and year |
| Watchdog | Yes |
| Communication Ports | |
| Ethernet | RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X) |
| COM 1 | RS-232 (TxD, RxD, RTS, CTS, GND), non-isolated, Speed: 115200 bps max. |
| COM 2 | RS-485 (D2+, D2-), self-tuner ASIC inside, non-isolated, Speed: 115200 bps max. (Reserved) |
| LED Indicators | |
| System LED | L1 (Flash Red: System is in normal status) L2 (Green: The microSD card is in normal status and the connection to WISE is OK (for firmware v2.9.0 or later version only)) |
| Ethernet Link LED | Yes (Green: Ethernet link detected, Flashing Green: Ethernet packet received) |
| Hardware Expansion | |
| I/O Expansion Bus | Yes |
| Power Requirements | |
| Protection | Power Reverse Polarity Protection |
| Frame Ground | Yes (for ESD Protection) |
| Input Range | 12 ~ 48 VDC |
| Redundant Power Input | Yes |
| Power Consumption | 2.0 W |
| Mechanical | |
| Dimensions (W x H x D) | 91 mm x 123 mm x 52 mm |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 °C to +75 °C |
| Storage Temperature | -30 °C to +80 °C |
| Ambient Relative Humidity | 10 to 90% RH, non-condensing |
Software Specifications
| Functions | |
| Rule Configuration Website | Access Web server on WISE controllers to edit and upload logic rules through web browser. |
| 36 IF-THEN-ELSE Logic Rules | 3 IF conditions with AND or OR operators 3 THEN actions and 3 ELSE actions |
| 48 Internal Registers | Hold temporary variables and read/write data via Modbus/TCP address. |
| 12 Timers | Delay / Timing functions. |
| 12 Schedules | Setup prescheduled routine tasks. |
| 12 Emails | Send Email messages to pre-set Email receivers. |
| 12 CGI Commands | Send pre-set CGI commands. |
| 12 Recipes | Set up THEN/ELSE action groups. |
| Data Logger | Set up the Data Logger configuration, include the data record format, and data file sending operation. |
| Modbus TCP/RTU Protocol | Real time control and monitoring I/O channels and system status of controllers via SCADA software. |
| IF Conditions | |
| DI Channel | ON, OFF, ON to OFF, OFF to ON, Change |
| AI Channel | =, >, <, ≥, ≤ (value) |
| Internal Register | |
| DI Counter | =, >, <, ≥, ≤ (value), Change |
| Timer | Timeout, Not Timeout |
| Schedule | In Range, Out of Range |
| Rule Status | Enable, Disable |
| THEN / ELSE Actions | |
| DO Channel | ON, OFF, Pulse Output (apply to XW-Board only) |
| AO Channel | Change the value |
| Internal Register | |
| DI Counter | Reset |
| Timer | Start, Reset |
| Schedule | Enable, Disable |
| Send | |
| CGI Commands | |
| Recipe | Execute |
| Data Logger | Start, Stop, One-Time Log |
| Rule Status | Enable, Disable |
Support I/O Module List
※ If the module name is marked in gray, it means that has been phase out.
| searchSearch | |
| Model: | |
| I/O Type: | |
| Functions: | |
| Modules: | |
| I/O Type | Functions | Modules | |
Ordering Information
- WISE-5800-MTCP CR
User-defined I/O & Data Logger Module for Modbus TCP Devices